Publicité
USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immax.cz
Designed in the Czech Republic, manufactured in China
Immax NEO Smart water leak sensor, Zigbee 3.0
TECHNICAL SPECIFICATIONS
Color: White
Battery: 2xAAA Lithium batteries
Protocol: ZigBee 3.0
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: ZigBee: 10dBm - max 19dBm
Range: 30m in open space
Standby current: 3.2uA
Working current: 140mA
Working temperature: 10°C ~+50°C
Battery life: 3 years
Sound alarm: 120dB
Dimensions: 48x14x63mm
1
2
3
1. Reset button
You can find the reset button under the battery cover. Press the button for min. 5
seconds before the LED begins to flash.
2. Buzzer
If the sensor detects a water leak, the sensor will start to emit an audible warning.
3. LED diode
If the LED is flashing, the sensor is in pairing mode
If the LED is not lit, the sensor is in Standby mode
APPLICATION INSTALLATION AND COMMISSIONING
Application download and registration
Scan the QR code to download the Immax NEO PRO app. Or search for and install
the Immax NEO PRO application in the App Store or Google Play.
Launch the Immax NEO PRO app and tap "Register" to create your own account
using your email. If you have completed your registration, log in to your account.
COMMISSIONING
Step 1:
- Remove the battery cover.
- Insert 2 AAA batteries into the sensor. Be sure to observe the correct polarity of
the batteries.
Step 2:
- Put the device into pairing mode. Hold the reset button for min. for 5 seconds.
The LED will then start flashing.
Step 3:
- In the Immax NEO PRO application, click on the Household tab and then the +
icon
- From the device list, select the zigbee sensor or select Other zigbee devices.
- You then proceed according to the instructions in the application.
- Wait for the device to be added to the application
Step 4:
- Close the battery cover and place the sensor in the desired location.
- Metal sensors must be in contact with the ground.
USE
If a water leak is detected, an audible alert will sound and an Alarm will be trig-
gered in the Immax NEO PRO app. To turn off the audible alarm, you must move
the sensor to a dry place.
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small parts, which
may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can dam-
age skin, clothing or area where the battery is stored. To avoid the risk of injury,
do not allow any substance from the battery to come into contact with the eyes or
skin. Every battery may burst or even explode if exposed to fire or other forms of
excessive heat. Take care when handling the batteries. To reduce the risk of injury
from mishandling the batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer's instructions for proper battery handling and
disposal.
CAUTION: The product and batteries should be disposed of at a recycling centre.
Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
installation site according to valid regulations. The installation must only be carried
out by an individual with the appropriate certification in the field of electronics.
During installation or when a fault is detected, the power cable must always be
disconnected from the socket (in the case of direct connection, the relevant circuit
breaker must be switched off). Improper installation can damage the product and
cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not
operate the device if the power cord shows signs of damage. CAUTION: Follow
the instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.cz
If you have any questions or need advice, please contact us at support@immax.eu
Publicité
