Publicité
14
OPERATING INSTRUCTIONS
Fault Codes
1. If the display reads "AS" or "ES" , a sensor
has
failed.
Contact
Frigidaire® Service Center.
2. If the display reads "EC" , check the
following
operating
voltage should be 115V±10% and the
surrounding temperature should be with in
the range of 41 °F to 89 °F. Unplug the unit
and plug it in again under normal operating
conditions. If the "EC" code persists,
contact
your
Service Center.
3. If
the
display
communication between display PCB and
main control PCB is faulty. Contact your
Authorized Frigidaire® Service Center.
Removing Collected Water
1. Emptying the Bucket:
a. When the bucket is full, the unit will shut
down and the BUCKET FULL indicator will
illuminate.
your
Authorized
conditions.
Outlet
Authorized
Frigidaire®
reads
"E4",
b. Do not move the unit at this time otherwise
water may spill on the floor.
c. Press sides of bucket gently to unclip the
bucket from the unit.
d. Remove the bucket as shown in the
photographs below and empty the bucket.
the
Publicité
