Publicité
-
High speed
Pressing the button again will activate the cold air mode. In this
mode, the air speed is high, it cannot be adjusted.
4. If you have selected a speed setting other than cold air mode,
set the desired air temperature between 55 °C, 80 °C and 115 °C
by repeatedly pressing the temperature change button.
NOTE: in cold air mode it is not possible to adjust the temperature.
5. Run the brush through damp or dry hair, from roots to ends,
until the desired style is achieved.
WARNING: do not obstruct the air inlet of the appliance during use.
6. When you have finished using the appliance, press the power
button to switch off the appliance and disconnect it from the
mains.
7.
Place the hot air brush on a heatproof surface until it cools
down. Remove hair and dust and clean the appliance with a
soft cloth.
8. Store the brush in a dry place.
4. CLEANING AND MAINTENANCE
-
Unplug the appliance from the power supply and allow it to
cool down before cleaning.
-
Use a soft, damp (not wet) cloth to clean the surface of the
device. Use a soft brush or a cotton swab to clean the air inlet.
ENGLISH
CERAMICCARE UNIQUE TOUCH
59
Publicité
