Publicité
Supplied Parts and Hardware for Step 2
Wall Plate
03
x 1
ST 5/16 x 2 3/4"
Lag Screw
A1
x 4
STEP 2
Mount the Wall Plate on the Wall
For mounting on wood stud walls, go to Option A on page 08 to 09.
For mounting on concrete and concrete block walls, go to Option B on page 10 to 11.
Option A
For Wood Stud Installation
1 6 "
( 4 0 6
m m
)
2 4 "
( 6 1 0
m m
)
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the lag
screws
only until they are pulled firmly against the wall plate (DO
A1
NOT overtighten). DO NOT use a drill; only use a socket wrench.
• DO NOT use wall anchors
≤5/8" (16mm)
Tape Measure
Stud Finder
A2
for this mounting option.
Wall Plate Template
Wall Anchor
A2
x 4
Nominal: ≥2" (51mm)
Actual: ≥1 ½" (38mm)
Nominal: ≥4" (102mm)
Actual: ≥3 ½" (89mm)
Awl
Level
08
04
x 1
CAUTION!
This anchor is for concrete
and concrete block walls
ONLY. DO NOT use them in
drywall or wood studs.
7/32" (5.5mm)
1/2" (13mm)
Wood Drill Bit
Socket Wrench
Wall Anchor
A2
Publicité
