Publicité
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the lag
only until they are pulled firmly against the wall plate (DO NOT
screws
A1
overtighten). DO NOT use a drill; only use a socket wrench.
• Use wall anchors
• Mount the wall plate directly on the concrete surface.
• Minimum concrete block size: 8" x 8" x 16" (203 x 203 x 406mm)
1
04
2
Option B
For Concrete and Concrete Block Wall Installation
Tape Measure
Hammer
A2
for this mounting option.
≥ 8" (203mm)
Level
Note:
• Be sure to use the specified drill bit.
• Never drill into the mortar between blocks.
10
35mm
1 3/8"
2 3/8"
60mm
35mm
1 3/8"
1 3/8"
35mm
35mm
3/8" (10mm)
1/2" (13mm)
Concrete Drill Bit
Socket Wrench
Wall Anchor
Mark 4 Hole Positions
Drill 4 Holes
60mm
A2
3" (75mm)
3" (75mm)
ø3/8"
ø3/8"
(10mm)
(10mm)
Publicité
