Publicité
Supplied Parts and Hardware for Step 2
Wall Plate
03
x 1
Wall Anchor
A2
x 6
STEP 2
Mount the Wall Plate on the Wall
For mounting on wood stud walls, go to Option A on page 08 to 10.
For mounting on concrete and concrete block walls, go to Option B on page 11 to 12.
Option A
For Wood Stud Installation
• 16"-16" wood stud go to page 09
• 16" or 24" wood stud go to page 10
1 6 " (
4 0 6 m
2 4 " (
m )
6 1 0 m
m )
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the lag
screws
only until they are pulled firmly against the wall plate (DO NOT
A1
overtighten). DO NOT use a drill; only use a socket wrench.
• DO NOT use wall anchors
Wall Plate Template
CAUTION!
This anchor is for concrete and
concrete block walls ONLY. DO NOT
use them in drywall or wood studs.
≤5/8" (16mm)
Tape Measure
Stud Finder
A2
for this mounting option.
04
x 1
Nominal: ≥2" (51mm)
Actual: ≥1 ½" (38mm)
Nominal: ≥4" (102mm)
Actual: ≥3 ½" (89mm)
7/32" (5.5mm)
Awl
Wood Drill Bit
08
ST 5/16 x 2 3/4"
Lag Screw
A1
x 6
1/2" (13mm)
Level
Socket Wrench
A2
Wall Anchor
Publicité
