Publicité
Tools Needed (Not Included)
Electric Drill
Pencil
WARNING:
• Avoid the risk of personal injury or property damage! Tighten the lag
A1
only until they are pulled firmly against the wall plate (DO NOT
screws
overtighten). DO NOT use a drill; only use a socket wrench.
• Use wall anchors
• Mount the wall plate directly on the concrete surface.
• Minimum concrete block size: 8" x 8" x 16" (203 x 203 x 406mm)
1
04
Option B
For Concrete and Concrete Block Wall Installation
Tape Measure
A2
for this mounting option.
≥8" (203mm)
3/8" (10mm)
Hammer
Concrete Drill Bit
11
35mm
2 3/8"
1 3/8"
60mm
35mm
1 3/8"
1 3/8"
35mm
35mm
1/2" (13mm)
Level
Socket Wrench
Wall Anchor
Mark 6 Hole Positions
60mm
A2
Publicité
