Publicité
OVERVIEW OF THE BALTIC BIRCH
WORKSTATION
The Baltic Birch Workstation was designed
to allow the user to clamp and cut different
types of materials to complete their mortise
or dowel joint. This workstation provides
extra safety and peace of mind when
performing the type of joinery chosen. The
built in Miter Attachment allows cuts from 0
to 45 degrees and made to last using high
grade stainless steel.
MOUNTING THE WORKSTATION TO A TABLE OR BENCH
1. Line up the Workstation on the edge
of your workbench or table, allowing it
to overhang by 1/4". Using (2)
adjustable bench clamps (not provided)
attach them to the sides of the
workstation as shown in Figure 1 and 2.
CONTENTS OF PARTS BAG
(2) - Upper Wood Braces
(4) - No. 6 x 0.75" Flat Head Screws
(2) - Threaded T-Bolts
(2) - Clamping Blocks
(2) - 1/4" S/S Washers
(2) - Adjustable Handle
ADDITIONAL RECOMMENDED
TOOLS AND ACCESSORIES
2 - Micro Jig Matchfit Dovetail Clamps
(included with Model 08252)
2 - Bench Clamps (Not Included)
FIG. 1
3
FIG. 2
Publicité
