Publicité
troubleshooting
High current detected.
Too much suds has been
detected during the washing
cycle.
The unit pauses until the suds
dissapate. Then, the unit will go
back into operation.
When it fi nishes washing, End and
the SUdS code will blink in turn.
A fault is detected by the water
level sensor.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
34_ troubleshooting
WA484DSHA-03050D_EN.indd Sec8:34
WA484DSHA-03050D_EN.indd Sec8:34
All manuals and user guides at all-guides.com
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
Call for service.
2012-07-02
2012-07-02
3:39:29
3:39:29
Publicité
