FLORABEST HG00249 Instructions D'utilisation Et Consignes De Sécurité page 15

This charging process must be carried out indoors because the splash
protection no longer works when the DC charging socket
The charge level of the rechargeable batteries is shown on the prod-
uct on the charge indicator
when it is switched on:
Red LED is slow flashing: the rechargeable batteries need to
charge.
Not any LED and sound effect response: the rechargeable
batteries voltage is very low, they must be charged immediately.
Red LED is fast flashing: the rechargeable batteries are in the
charging status.
Red LED is illuminated: the rechargeable batteries are fully
charged.
Switch the frequency controller
charging process to prevent disturbances from visual or acoustic
signals.
Remove the rubber plugs from the DC charging socket
Plug the USB charging cable's
ing socket
12
cable to your computer with a USB port. Alternatively, you
13
can use a USB adapter, which can be bought from a retailer.
(a red LED on the motion sensor
6
and connect the USB plug of the USB charging
to Programme 0 during the
3
round plug into the DC charg-
13
is open.
12
)
5
.
12
GB/IE/NI 15