Publicité
Charge the Handset
STEP 2
Plug the AC adapter into a power outlet
and then connect the AC adapter cable to
the charging cradle . Put the handset on
the cradle .
When the handset is on its cradle, it will
show a lightning bolt in the battery icon
when it is charging .
We recommend that you leave the handset
on the cradle for 30 minutes before
proceeding to the next step . The handset
requires 10 hours to fully charge .
6
Register the Handset
STEP 3
Press the Page key on your Ooma Telo and
hold it down for three seconds to activate
registration mode . When the handset
detects the Telo, press the YES soft key
to proceed .
Once the handset is successfully registered,
the home screen will be displayed .
Each Ooma Telo supports up to four Ooma
HD3 Handsets .
Page key on
newer Telos
Page key on
older Telos
7
Publicité
