Publicité
4
Pull the wall bracket fixing part forward. Two people are required to install the product on the assigned area of the wall bracket.
5
For managing the power cord and other cables for peripheral equipments,
bundle the wires by using the supplied wire fixing tool. Be sure the wires are not unbundled
or came off when rotating or operating.
Insert the cables and pull the angle adjustment bracket forward.
Arrange the wires by using the hole to avoid the interference with wires when rotating the set.
Check the operation 2 ~ 3 times and fix the wall molding if it works properly.
You can keep the TV level using the height leveler.
[Slim, Normal TV]
Install the TV set to the wall
bracket and rotate the 2 safety
pins on the upper part to fix.
[Ultra-Slim Only]
Publicité
