Replacing the Battery
Release the lamp head as shown in the diagram and open the battery
compartment as shown in the illustration and replace the NiMH, AAA,
1.2 V, 200 mAh battery with a new one of the same type and the same Power.
Pay attention to the correct polarity, polarity symbols are located in the battery
compartment.
Cleaning
▪
Wipe the housing of the device with a lightly moistened cloth. Use detergent
as needed. Do not immerse the device in water or any other liquid.
▪
Do not clean the device with aggressive chemicals or abrasives in order not to
damage the surfaces.
Technical Data
Solar Panel:
LED:
Dimensions:
Degree of Protection:
Battery:
Illumination Time:
2 V / 40 mA / 0,08 W (Ø 63,6 mm)
1x 0,06 W
Ø 74 x 340 mm
IP44
1x NiMH, 1,2 V, HR03 (AAA), 200 mAh
Up to 8 h with fully charged Battery
9