Publicité
CHANGING PUSH BUTTON FUNCTION
BUTTON FUNCTION MOMENTARY
PROCEDURE
1.
Rotate reset ring counterclockwise, as shown above.
2.
Place stop pin in position shown.
3.
If converting from Key-to-Reset, disregard key.
PROCEDURE
1.
Remove contact block screws from
mounting plate.
2.
To change button function remove
the plate and use directions provided.
3.
Reassemble backplate and contact
box (ensure contact tabs are facing up as
shown).
4.
If reconfiguring from Turn-to-Reset,
remove Turn-to-Reset label.
NOTE
If you remove stop pin and wedge block,
consider keeping for potential future use.
Publicité
