Publicité
FAUCET ASSEMBLY
2 PEOPLE MAY BE REQUIRED TO
INSTALL YOUR FAUCET. BEFORE
STARTING YOUR INSTALLATION, COVER
THE SINK DRAIN TO AVOID LOSING ANY
PARTS.
Unscrew the faucet nut (D) and remove the
washers (B and C) and faucet nut.
Insert the faucet body with hose and
connectors through the center hole in the sink
until the faucet assembly sits flat onto the sink
top.
With the faucet assembly through the sink,
slide rubber washer (B) onto the threaded
mounting shank and then repeat for the metal
washer (C). Thread the faucet nut (D) onto the
mounting shank to the top pressing against
the washer and sink bottom. Lock the faucet
nut into position by tightening the screws (E)
with a phillips head screwdriver. Do not
overtighten.
5 | www.bluesk youtdoorliving.com
Publicité
