Publicité
Reversible shelves
In order to optimize the loading of bottles in the cellar, we have designed a special shelf that allows turning to coordinate
the inversion of the door.
In the standard configuration with the hinge on the right, A is close to the hinge and B (front with label holder) upwards
as in photo 1.
After reversing the direction of the door, you must coordinate the shelves.
1. Turn all the shelves over, A will be on the left and B will be on an downwards position.
2. Release the screw on the wooden front as shown in photo 3 so that B is upwards and fix it again.
3. Make sure that A is close to the hinge and B is upwards as shown in photo 2.
5. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 10-38°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
12°C/12-20°C. The ambient temperature has an impact on the interior temperature and humidity of your
cellar. For optimal operation, the settings of your cellar are made for ambient temperatures of 23°C to 25°C.
Temperature setting
A
B
C
Display shows upper zone temperature at its setting.
D
E
F
ON/OFF switch, turn on by pressing once, turn off by pressing and holding 5 seconds.
Decrease temperature of 1 degree Celsius or Fahrenheit.
Raise temperature of 1 degree Celsius or Fahrenheit.
Temperature display in Celsius.
Temperature display in Fahrenheit.
45
Publicité
