Publicité
How to Use the Ratchet
1) Take the tail end of the long strap around your
trees and thread through the loop and away from
the tree, towards your tent.
2) Thread loop of the ratchet through the D-Ring
at each corner of your tent and take the buckle
through the loop.
3) Take the long strap tail and thread it through the
ratchet buckle spindle, pulling through all excess
orange strap. Crank ratchet until the orange strap
has gone around the spindle at least 1.5 full
revolutions to underlock it. This will prevent any
slippage before moving to the next corner.
4) Repeat step 3 at each tent corner, trying as
much as possible to keep the tent corners pointing
towards their respective anchor points.
5) Revisit all corners and adjust as necessary. Use
line of sight down each strap to centralise your tent
between your chosen anchor points. You have about
a 7º degree margin of tolerance in each direction.
All manuals and user guides at all-guides.com
6) Tighten ratchets as much as you can.
ENSURE RATCHETS ARE IN LOCKED POSITION
BEFORE ENTERING THE TREE TENT.
7) Roll and tidy up strap ends to avoid any
possible trip hazards.
Crank the ratchet handle back & forth 7- 9 times to
increase tension to straps.
UNLOCKED
LOCKED
Publicité
