Valeo Cyclee GO 7 MOTOR Manuel D'utilisation page 5

Technical data
May vary according to bike manufacturer specifications
SKU Description
654012 Go7 Motor
Product codes -
Specifications
654001 Go7 Motor Cargo 250W or 750W 45km/h or 28Mph
Integrated
7 gears
Gearbox
Max Torque Up to 130 Nm
Nominal voltage
46.8 V
Operating range -20°C to 50°C (performance limitation may occur at temperature
temperature between -20°C and -10°C)
Storage
-30°C to 60°C
temperature
Protection rating IP67
Weight
4.8 kg
Crank spindle
ISIS standard
interface
6
Go 7 Motor
Continuous Max assistance
Rated Power up to
250W or 750W 45km/h or 28Mph
OPERATING INSTRUCTIONS
Please read the other user manuals of the Valeo Cyclee™
e-bike system (Battery, Display, Charger) before using the
e-bike for the first time.
Start riding
To get assistance from the e-bike motor it is essential that the following
requirements are met:
• The battery is charged and inserted in the docks (see battery user
manual)
• The system is switched ON (see display user manual)
• The speed sensor is activated when the e-bike is moving
• Rider pedal input is detected by the motor
The drive unit is activated as soon as you step on the pedals (except in
assistance level "OFF"). The motor output depends on the assistance
level selected.
As soon as you stop pedaling when in normal operation, or as soon as
you have reached the speed limit of your e-bike, the assistance from
the e-bike motor is switched off.
The motor is automatically reactivated as soon as you start pedaling
again and the speed is below the speed limit of your e-bike.
7