Publicité
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Test Signal Setup
This feature assists in the setting of
OUTPUT BALANCE. Starting with (L) front
speaker, a test sound is output in clockwise
order. While the test signal is output, adjust
the output of the center speaker and
Surround speaker (R/L).
(See "OUTPUT BALANCE." P. 56.)
1
Do steps 1~2 of "Output
Balance Setup" on page 56.
2
OUTPUT BALANCE
CENTER
: 0dB
SURROUND(R)
: 0dB
SURROUND(L)
: 0dB
SUBWOOFER
: 0dB
TEST SIGNAL
TEST SIGNAL
: OFF
: OFF
SELECT
:
SET
: SET
END
: ACTION
No sound will come from the subwoofer.
Adjust as desired when playing a disc.
While the TEST SIGNAL is output, if the
setting change in the OUTPUT BALANCE
(p. 56) is under 2 seconds, the output will
switch to the next speaker. The speaker
name from which the TEST SIGNAL is
currently being output is displayed.
(Example; "TEST SIGNAL : CENTER")
2sec
OFF
FRONT(L)
CENTER
2sec
SURROUND(L)
2sec
3
Press ACTION four times to exit.
FRONT(L)
B1
CENTER
Listening
position
SURROUND(L)
SURROUND(R)
<Speaker Position>
TV Mode
Example
4753S-K(E) P36-60 (030225) RAM.p65
Still Mode
Set to reduce jitter in a displayed still picture or a motion
picture.
1
Press ACTION
to display DVD MAIN MENU.
2
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
ST I
T I L L
L L MODE
MODE
TV MODE
P A R E N T A L L O C K : L E V E L 8
Press
SELECT
SET
END
to select "TEST
AUTO: "FIELD" (Field still) or "FRAME" (Frame still) is
SIGNAL," and
automatically selected during the still mode.
press SET .
(Factory preset)
(See below.)
FIELD: "FIELD" (Field still) is always selected.
This setting will reduce jitter when compared
with "AUTO" on some discs.
FRAME: "FRAME" (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with "AUTO" on some discs.
3
Press ACTION
to exit this mode.
TV Mode
Set the screen display style for wide-screen video
2sec
material playback.
FRONT(R)
1
Press ACTION
to display DVD MAIN MENU.
2sec
2
DVD MAIN MENU
SURROUND(R)
DISC LANGUAGES
AUDIO OUTPUT
ST I L L MODE
TV MODE
P A R E N T A L L O C K : L E V E L 8
SELECT
SET
FRONT(R)
END
4:3 Pan & Scan (Factory preset) :
Wide-screen video data is played in
Pan & Scan style (left and right of screen
is trimmed.)
• Video data not formatted in Pan & Scan
SUBWOOFER
will play in letterbox style.
4:3 Letterbox :
Wide-screen video data is played in
Letterbox style (top and bottom of screen
has black margin).
C1
16:9 :
Set "16:9" when using Wide-screen TV.
3
Press ACTION
to exit this mode.
[Pan & Scan (Factory preset)]
57
Press
to select "STILL MODE,"
and
: AUTO
: AUTO
: 4 : 3 L e t t e r b o x
press SET repeatedly
for mode. (See below.)
:
: SET
: ACTION
Press
to select "TV
MODE," and press SET
repeatedly for
: AUTO
: 4 : 3 L e t t e r b o x
mode.
(See below.)
:
: SET
: ACTION
[Letterbox]
2003/03/25, 13:21
57
Publicité
