Publicité
Settings for DVD Operation (continued)
Output Balance Setup
Adjust the volume level output from the speakers. To adjust, play a disc or set the "TEST SIGNAL"
(p.57) to ON. Then adjust while confirming the volume. (Even if "OFF" or "NONE" is set in "SPEAKER
SIZE," the speaker OUTPUT BALANCE can still be set.)
1
Do steps 1~2 of "Speaker Output Setup" on page 55.
2
Press
OUTPUT BALANCE
to select "OUTPUT BALANCE," and press SET
CENTER
CENTER
: 0dB
: 0dB
SURROUND(R)
: 0dB
SURROUND(L)
: 0dB
to display OUTPUT BALANCE screen.
SUBWOOFER
: 0dB
TEST SIGNAL
: OFF
Press
to select an item, and press SET repeatedly.
SELECT
:
SET
: SET
(See below table.)
END
: ACTION
Menu item
Setting
CENTER
-6dB ~ +6dB
SURROUND(R)
SURROUND(L)
0dB(factory preset)
SUBWOOFER
TEST SIGNAL : Switch test signal used for OUTPUT BALANCE setting to "OFF" or "FRONT(L)"....
➡ See page 57.
3
Press ACTION four times to exit.
Delay Time Setup
To enjoy 5.1 CH sound, it is ideal to place all
speakers, except the subwoofer, in a circular
arrangement. (See <Speaker Position> p. 57.)
If this is not possible, setting Delay Time gives the
sound output a delayed effect which gives you the
illusion of the ideal listening position. (See right.)
1
Do steps 1~2 of "Speaker Output
Setup" on page 55.
2
Press
to select "DELAY TIME," and press SET
to display DELAY TIME screen.
Press
to select an item, and press SET
repeatedly. (See below.)
Menu item
Setting
0ms
1ms
2ms
3ms
CENTER
0ms
5ms
10ms
15ms
SURROUND
3
Press ACTION three times to exit.
56
4753S-K(E) P36-60 (030225) RAM.p65
Remark
Adjust so that the center speaker volume is virtually the same
level (-6dB ~ +6dB) as the front speakers.
Adjust so that the surround speaker(R) volume is virtually
the same level (-6dB ~ +6dB) as the front speakers.
Adjust so that the surround speaker(L) volume is virtually
the same level (-6dB ~ +6dB) as the front speakers.
Adjust so that the subwoofer speaker volume is optimum.
However, because no test sound will come from the
subwoofer, play a disc to confirm, then adjust.
[See <Speaker Position> p.57.]
•
,
•
,
B1
Center speaker
C1
Surround speaker
Remark
4ms
5ms
Setting a delay effect.
0ms(Factory preset)
20ms
56
: Delay time as 0ms
(Factory prest)
<
: Find the distance
,
B1
C1
table (below) and change to
the recommended setting.
B1
Distance
Setting
1 /2
1.3 ms
Approx. 50 cm (1 feet)
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
C1
Distance
Setting
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
Approx. 600 cm (18 feet)
15.9 ms
2003/03/25, 13:21
in the
Publicité
