Publicité
1. Contents
EN
Lamp, power cable, connection cable 10 cm, installation kit,
set of hangars (cable), user manual, individually packed.
2. Intended use
Florabooster® LED light strips are designed for the cultivation of seedlings
and for illuminating plants in low light conditions. An ideal light spectrum provides
maximum energy for plant growth.
3. Spezifikationen:
Light source
Power consumption
Beam angle
Power supply
Ripple factor
PF (Power Factor)
Radiation wavelengths
Effective illumination area
PAR (Photosynthetically Active Radiation)
PPF (Photosynthetic Photon Flux per second)
Optimal height of light (above plants)
LED life expectancy
Operating temperature
Material in light / lampshade
Electrical protection class
Limit of group connection in series (Fig. 2a)
4. Installation and safety instructions:
Install light in desired location using metal mounting plates fastened directly to the surface using
screws (Fig. 1). Light can be installed on hanging (cable) lights. Before installing, ensure that light
is not plugged in. Consult a qualified technician to avoid installation errors.
LED
9, 13, 18 W
120°
230 V 50/60 Hz
<5%
0,7
red -650nm; blue -450nm;
Infrared - 750 nm
9 W = 0.7 m
13 W = 1.0 m
18 W = 1.4 m
9 W = 26 μmol
13 W = 30 μmol
18 W = 32 μmol
9 W = 10 μmol/s
13 W = 14 μmol/s
18 W = 18 μmol/s
20 - 40 cm
25000 hours
1 °C bis + 40°C
Plastic/Plastic
IP44
Maximum total power of 100 W.
4
2
2
2
Publicité
