Publicité
All manuals and user guides at all-guides.com
3.1.2 Motion Detection
If Motion Detection is activated, when the camcorder is powered on, a
message "Wait for 10 seconds to enter Motion Detection or touch the
screen to power off" will be displayed on the screen. This means the
system will enter Motion Detection automatically in 10 seconds; when
the camcorder detects any motion in front of lens, Video Record will be
activated for a duration the same as the length setting.
To set the motion detection, do the following:
1.
Touch
menu.
2.
Touch
to Driving Safety Main Menu.
3.
Touch
for entering Motion
Detection menu, touch
again to activate (on).
4.
Touch
Note:
1. When the battery is fully charged and is in good condition, Motion Detection can
record continuously for about 30 minutes.
2. As the camcorder is used, the battery storage capacity will decrease gradually. This
is a normal phenomenon for the battery.
to enter main
to switch over
/
to select
to return to record screen.
12
Publicité
