Publicité
EN
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
4
Original Instructions
Technical Abbreviations Key
psi
bar
BSP
Specification
Fluid type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compressed air
Maximum operating pressure:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10bar (145psi)
Adjustable outlet pressure range: . . . . . . . . . . . . . . . . . . . 0.5 - 8.5bar (7 - 123psi)
Operating temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 50°C
Air connections: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ¼" BSP (G 1/4")
Condenser bowl capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150ml
Condenser bowl material:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polycarbonate
General Safety Warnings
WARNING: Read and understand the safety instructions before installing, operating, repairing,
maintaining, cleaning, changing accessories on, or working near this tool. Failure to do so can result
in serious injury.
Save all warnings and instructions for future reference.
• Only qualified and trained operators should install, adjust, or use this device.
• Do not modify this device. Modifications can reduce the effectiveness of safety measures and
increase the risks to the operator.
• Do not discard the safety instructions; give them to the operator.
• Do not use this device if it has been damaged.
• Do not allow the supply pressure to exceed the maximum stated (see 'Specification').
• Ensure that all parts of the system (hoses, couplers, etc.) are rated for the air pressure to be used.
Projectile hazards
• Be aware that failure of this device can generate high-velocity projectiles.
• Always wear impact-resistant eye protection during operation of this device.
• The grade of protection required should be assessed for each use.
• The risks to others should also be assessed at this time.
• Ensure that the device is securely fixed.
Work area hazards
• Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces caused by
use of the tool and also of trip hazards caused by the air line or hydraulic hose.
• This tool is not intended for use in potentially explosive atmospheres and is not insulated against
contact with electric power.
Pounds per square inch
Metric unit of pressure
British Standard Pipe (thread)
Publicité
