Publicité
HOW DO I RESET THE UNIT TO FACTORY SETTINGS?
Press and hold POWER and MODE simultaneously for at least
10 seconds .
CAN I USE TGR WITHOUT MANUALLY INPUTTING DISTANCES
FOR AN 8, 6, OR 4-IRON?
Yes, TGR can be used without entering the Club Selector values,
it will simply use the default settings appropriate for the average
player . Entering your specific values will improve accuracy up
to one club length .
PRISM LOCK ISN'T WORKING (NO AUDIABLE BEEP):
Prism Lock only works when in Scan Mode . By pressing and
holding POWER you will get constant updated distance readings
until the laser hits the prism .
CLEANING/MAINTENANCE
Blow away dust or debris on lenses, or use a soft lens brush (such
as the one found on the Leupold LensPen) . To remove fingerprints,
water spots or tougher dirt, use a soft cotton cloth or the cleaning
end of the Leupold LensPen . A lens tissue with lens cleaning fluid
may be used for more stubborn dirt . Always apply cleaning fluid to
the cleaning cloth, never directly to the lenses .
To insert a new battery, remove the battery cover (shown in
24
Publicité
