Publicité
The GX-2c rangefinder features PinHunter 3 Laser Technology,
which will provide you with the distance to the closest object
ranged . When you press and hold the MODE button for at least
2 seconds and then release it, the Quick Set Menu is prepared
for navigation . To activate a mode, you must advance to that
function by pressing and releasing the MODE button until the
desired function is displayed . To set a mode, press the POWER
button once and the icon for the mode will display and the word
"On" will appear in the bottom portion of the display . Pressing
the POWER button again will turn that mode off; displaying
the word "OFF" in the bottom portion of the display . Each
subsequent depression of the POWER button will toggle that
function between on and off .
NOTE: Allowing the rangefinder to sit idle for 30 seconds will
cause an automatic power-off, saving all selections. If additional
modes require activation/deactivation, simply press and release
MODE to continue through the Quick Set Menu. Pressing and
holding MODE for at least 2 seconds at any time will exit the
Quick Set Menu, save all previous changes, and prepare the
rangefinder for immediate use.
Hold POWER and MODE simultaneously for at least 10 seconds
to reset factory settings .
9
Publicité
