Publicité
PRODUCT & CUTOUT DIMENSIONS
Model: FMWDR3093-30
OUTLET AREA
The outlet can be located anywhere within the
shaded area. Anywhere within the shaded area,
the minimal distance between the appliance and
1 ¾
the wall is
in (45 mm).
Note: Power cord plug is a
NEMA 5-20P
CABINET DIMENSIONS
NOTICE: The cabinet base must be flat and
capable of supporting a weight of at least 142 lbs
(64.1 kg).
GENERAL CABINET REQUIREMENTS
¼" (
6.4 mm) space between the side of the
appliance and an adjacent wall or cabinet
door when installed at the end of a cabinet run.
The cabinet base must be flat and capable of
supporting the weight of your appliance
when in use.
See section Cabinet Dimensions
The appliance door will overlap the furniture
below by approx 3/16" (5 mm) when opened.
WARNING
There must be an air gap of at least ]" (6 mm)
between the appliance and the cabinet walls when
the appliance is installed, i.e. X" (3 mm) each side.
UNDER COUNTER DIMENSIONS
Customer Support: Call 1-866-231-8893 or email: info@forno.ca
Forno Appliance 2023
Publicité
