Publicité
BOILER ASSEMBLY
1.
Remove the Boiler from its packing and make sure all packaging has been
removed (including the protective bags). Put the station on a flat and solid
surface.
2.
Unscrew the Safety Cap (1). Fill the boiler with a maximum of 8 cups (1.9
litres) of water for the 5100CD. Use the funnel supplied, making sure you do
not overfill the tank (you can also use the water stick to determine the water
level in the steam tank).
Note:
To preserve the life of your boiler, we recommend distilled water. Tap
water is okay, but more cleaning is required. See maintenance section for
more cleaning information.
How to use the water stick:
your finger on the end of the water stick. While holding the end, remove the
water stick from the boiler tank. The water level capacity will then appear on
the stick measurement to indicate the level.
STEAM GUN ASSEMBLY
Remove steam gun from packaging and ensure all protective bags/outer
1.
packaging has been taken off.
Insert the two piece S team C ord Holder (7) into the flange on top of the
2.
boiler and attach the spring on the steam hose to the coil end of the wand.
Connect the steam gun to the Ilme P lug (9) and the Steam Quick Connect
3.
(11) on the boiler. Turn the Lock Mechanism (8) until it clicks to ensure full
connection.
Fully insert the water stick into the tank. Place
7
9
8
Publicité
