Publicité
Your TV speaker has already been paired and ready to go right out of the box. In case that a re-
pairing or re-connection between the speaker and the base is needed or you need to pair
additional Speakers please follow the steps described below:
1. Turn on the TV Speaker.
2. Short press PAIRING (13) on the back of the charging base
3. As soon as pairing is successful both the speaker TV LED (11) and transmitter LED (18) will
become solid on and the audio sounds will start playing.
4. Repeat the steps again if pairing was not successful.
LISTENING TO TV AUDIO
1. To turn TV speaker on, rotate the "ON/OFF VOLUME" knob (7) clockwise until you hear a
click and adjust the desired volume. Press
2. To turn TV Speaker off, rotate the "ON/OFF VOLUME" knob (7) anticlockwise until you hear
a click.
The connection indicator (18) on the base station flashes.
3. The TV speaker volume control works independently from your TV speakers.
it is recommended to adjust your TV speakers to low or off.
4. On some TV's, you may need to use your remote to go into the TV menu to achieve an
optimal audio/speaker setting. Please refer to your TV user manual for details.
Note: To save energy, the base station and TV speaker switch to standby mode after about 15
minutes if the TV is switched off or if TV speaker does not receive an audio signal.
The connection indicator (18) disappears after few minutes.
The speaker will not turn itself back on automatically after auto power off.
To turn the speaker on after auto power off, rotate "ON/OFF VOLUME" knob (7) to the off
position and turn the speaker on again.
Uses unique technology to improve your understanding of dialogue. You hear human voices
more clearly, while disruptive ambient noises are minimised.
1. When you press
clarifying mode, the associated status LED illuminate.
2. To turn off dialogue clarification, press
expires.
3. The TV loudspeaker was developed to make the inadequate speech transmission of flat
screens, which is further worsened by acoustic effects, understandable and comfortable
again.
4. For people with hearing impairments, it is also recommended for use.
5. The general perception of sound changes when using speech amplification.
PAIRING TO BASE UNIT
BASIC OPERATIONS
CLEAR VOICE FEATURE TV SPEAKER
or
(button 10 or 5) the system switches into a different dialogue
(button 11) to switch on the TV-mode.
or
(button 10 or 5) again the status LED
3
HORST / English Instruction Manual
Publicité
