Télécharger Imprimer la page

Publicité

Liens rapides

Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos
Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici
Pour / For
Honda
Honda Jazz (10/2008>)
Lato passeggero / Passenger side / Lado
pasagero] [Solo per sostituzione alzacristalli con
motori originali a due fili / Only for replacement
of window regulators with two wires original
motors / Solo para sustituir elevalunas con
motor original de 2 conectores] [Non prevista
funzione comfort / Comfort function not
provided / No prevista función confort
LH Lato passeggero con Guida destra
RH Lato passeggero con Guida sinistra
LH Passenger side with Right hand drive
RH Passenger side with Left hand drive
LH motore 2 fili / 2 wires motor no comfort
RH motore 2 fili / 2 wires motor no comfort
RH 72210TF0G01
14 w01
THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE.
CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
DIESE MONTAGE-ANLEITUNG IST FÜR DIE BEIDE LINKE UND RECHTE SEITE.
ESTA INSTRUCCION DE MONTAJE ES PARA LOS DOS LADOS IZQUIERDO Y DERECHO.
ESTAS INSTRUÇÕES VALEM TANTO PARA O LADO ESQUERDO QUANTO PARA O DIREITO.
DEZE AANWIJZINGEN GELDEN VOOR ZOWEL DE LINKER- ALS DE RECHTERKANT.
Η ΠΑΡΟΥΣΑ Ο∆ΗΓΙΑ ΑΦΟΡΑ ΤΟΣΟ ΤΗΝ ΑΡΙΣΤΕΡΗ ΟΣΟ ΚΑΙ ΤΗ ∆ΕΞΙΑ ΠΛΕΥΡΑ.
LA PRESENTE ISTRUZIONE VALE SIA PER IL LATO SINISTRO CHE PER IL LATO DESTRO.
12V.
- AC946

Publicité

loading

Sommaire des Matières pour Magneti Marelli AC946

  • Page 1 12V. Power Windows | Leve-glace Electrique | Elektrische Fensterheber | Elevalunas Electricos Máquina De Vidro Elétrico | Elektrische Raamheffers | Alzacristalli Elettrici - AC946 Pour / For Honda THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. Honda Jazz (10/2008>) CETTE INSTRUCTION DE MONTAGE EST POUR LES DEUX COTES DROIT ET GAUCHE.
  • Page 2 HD54 22-01-2018 ENGLISH ENGLISH THIS INSTALLATION INSTRUCTION IS FOR BOTH LEFT AND RIGHT SIDE. A) WARNING: DO NOT OPERATE THE WINDOW REGULATOR BEFORE IT IS COMPLETELY ASSEMBLY ON VEHICLE. Remove door trim and window regulator. B) Insert the electric window regulator into the door and secure it into holes at positions 1, 2, 3, 4 and 5. C) Secure the window at positions 6 and 7.