Publicité
Switching on the oven
Indicator light
The indicator light comes on while the oven is
warming up. Once the set temperature has
been reached, the light goes out.
Thermostat control knob
You use the thermostat control knob to set the
temperature. The temperature range is
continuous.
Switching on the oven without the switch
clock function
Turn the function knob to the function you
want. Adjust the recommended temperature
by moving the thermostat knob to the left or
right. You can adjust the oven to a variable
temperature.
The oven is now switched on. The pilot lamp is
active. When the lamp goes off, the
temperature you set has been reached.
Function knob
fig. 6
Symbol
Remove from the oven everything which you
are not using to prepare the dish. Slide the
dish into the oven if it is not necessary to pre-
warm the oven. See the temperature table to
determine the height of the ledge.
fig. 7 - NF1000 / NF1050 left oven
fig. 8 - NF1050 right oven
Description
oven lighting
thawing
conventional
hot air
grill
turbo-grill
ventilation + grill
ventilation + bottom heat
bottom heat
upper heat
turbo-grill + grill spit
Publicité
