Publicité
-The product can be cleaned with a sterilizing agent.
-Ensure this is completely flushed through before resealing
and filling with drinking water.
-Drain surplus water through the white drainage cap located
underneath and then replace the drainage cap.
-Fill the tank with fresh water and then drain off the water,
repeating step.
-To clean a motor, disassemble a back side of a device using
a screwdriver.
With any dryer and its maximum air flow mode apply air to
remove excessive dust or dirt that a motor might contain.
-Keep the appliance with the empty tank in a sure and dry
place and tturn off the water dispenser of the electricity if he's
not going to be used during a time.
TECHNICAL SPECIFICATIONS
220-240V~ 50Hz 65WClimate typel: NThis device conforms
to the safety requirements and provisions of directives
2014/35/EU on Low tension devices and 2014/30/EU on
Electromagnetic Compatibility.
PRODUCT RECYCLING - ENVIRONMENT
Packaging
The materials used in this product's packaging are
integrated in a system of waste collection, sorting
and recycling. If you wish to dispose of these
materials, you should use rubbish bins or other
municipal means of waste collection that are appropriate for
each type of material.
Electrical and Electronic Product
This symbol means that if you wish to dispose of
this product at the end of its life, you must take it
to a waste collection company authorized for the
selective collection of Waste Electronic and Electrical
Equipment (WEEE).
This product does not contain concentrations of materials
considered harmful to the environment.
| EN
7
Publicité
