Installation (continued)
6
Applying caulk
□ Once the fixture is mounted on the wall, caulk the
space between the wall and the upper 3/4 area of the
wall plate (B).
□ Leave the bottom 1/4 area uncaulked for drainage of
any water which might leak into the enclosure.
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals, solvents or harsh abrasives.
WARNING: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem
The bulb will not
light.
The fuse blows or
circuit breaker
trips when the light
is turned on.
Possible Cause
The bulb is burned out.
The power is off.
The circuit breaker is off.
The wires are crossed or the
power wire is grounding out.
Solution
Replace the light bulb.
Ensure the power supply is On.
Ensure the circuit breaker is in the On position.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at 1-800-986-3460.
7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.