Publicité
1
110 V
NOTICE
A 110 V GFCI outlet is required.
> Mark the holes to be drilled
for the anchors.
5
> Confirm that all screws
are securely attached.
9
> Line up the top screws
with the inserts on the
back of the mirror.
> Push mirror onto the wall
until screws are inserted
securely.
2
Ø ⅜"
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Check leveling of the top
two screws.
10
> For adjustment of the safety bracket, turn screw to
the position as pictured. Correct placement of screw
prevents the mirror from accidentally detaching from the
suspension rail.
3
2x
3x S8
> The plastic anchors
provided are for concrete
wall applications.
7
> Adjust leveling if required.
4
2x 6,5x61
1x 4,5x35
> Thred the two mounting
screws into the top two
anchors.
> Secure the L-bracket to
the wall with the screw on
the bottom.
8
> Plug the mirror into the
outlet.
MAL_Light and Mirror_LM7808/19.09.3
6
Publicité
