Publicité
4. Temperature setting
In comfort modes
select the desired set temperature. The temperature range for comfort mode and pilot mode is
between 5°C and 29°C and for Eco mode is between 1.5°C and 25.5°C. The temperature
difference between the ECO mode and the COMFORT mode is 3.5°C. Each time you press the
buttons to adjust the temperature, you increase or decrease the temperature by 0.5°C. Press
any other button except
the setting is saved. When the room temperature is higher than the selected temperature, the
heater will stop heating.
5. Keyboard lock
Press M button for three seconds to activate the keyboard lock function, in order to unlock, press
M again for three seconds.
Remarks:
1. The keyboard lock function doesn't lock the standby
2. The keyboard lock function will automatically be deactivated under below
circumstances.
1) the appliance is put into standby mode by pressing standby
2) the appliance suffers power disconnection.
You need to set again by pressing M for 3 seconds if you need this function.
6. Window detector function
to enter window detector function. Then press "
Press
If "ON" is selected, the window detection function is activated and
screen. When temperature decrease detected, the appliance will automatically enter anti-freeze
mode with
icon flashing. If temperature rises up, the appliance will go back to previous
icon on. You can choose "OFF" to inactivate the window detection function.
mode with
Remarks: the window detector function is not available under anti-freeze mode.
7. In case of power failure
, or pilot P or Eco
/
to finish the setting, otherwise after 5 seconds without action
(excluding anti-freeze mode
Keyboard lock
button.
Page 32 of 36
), press
button.
" to choose "ON" or "OFF".
/
icon will show on the
or
to
Publicité
