Télécharger Imprimer la page

Oceanic OCEAISH1000W3 Guide D'utilisation page 23

Publicité

• If the power cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
• The appliance should not be placed immediately
below a socket.
WARNINGS
overheating, do not cover the heater.
• Do not use this heater with a programmer, timer,
separate remote control system or any other
device that turns on the heater automatically
because there is a risk of fire if the device is
covered or placed incorrectly. Use only a remote
control device connected by the pilot cable.
• The device must be powered by a Residual
Current Device (RCD) with a rated operating
differential current of not more than 30 mA.
• Warning: if this appliance is installed in a
bathroom, it must be installed at least 60 cm
from a bath or shower (volume 2), in accordance
with the requirements of the French electrical
installation standard NFC 15 -100.
• The device must be connected to a circuit
independent electric protected by a bipolar
circuit breaker according to the standard
electrical installation NF C 15-100.
• Means for disconnection from the supply mains
having a contact separation in all poles must be
incorporated in the fixed wiring in accordance
with the wiring rules.
: In
Page 22 of 36
order
to
avoid

Publicité

loading

Ce manuel est également adapté pour:

Oceaish1500w3Oceaish2000w3