Date Setting; Time Setting; Clock Alarm - König Electronic HAV-CR32 Mode D'emploi

NOTE: Do not use rechargeable batteries. We recommend that you use alkaline batteries with this
clock for longer life, and lithium batteries in temperatures below freezing.
AC/DC Adapter
A 9V adapter powers the unit. Plug the adapter into a wall socket, making sure the adapter is not
obstructed and is easily accessible to the clock.
To completely disconnect from the power, the adapter should be disconnected from the clock.
NOTE: The clock and adapter should not be exposed to wet conditions. No objects filled with liquid,
such as vases, should be placed on the clock or adapter.
Setting the Outdoor Sensor
1. Remove the screws from the battery door.
2. Insert 3 AAA batteries, matching the polarity (+/-).
3. Select a channel CH1/CH2/CH3.
4. Close the battery door and tighten the screws.
5. Select temperature units: °C/°F.
6. Do not place the sensor more than 30.0 m (98 ft) from the main (indoor) unit.

Date Setting

• Press [SET] for setting the date. The clock display will blink
QUICK USER GUIDE
CLOCK/CALENDAR
• Press [UP] or [DOWN] to change value settings. Hold to adjust the frequency

Time Setting

• Press [SET] to set clock, Select 12/24H format, hour, minute, Press [UP] or [DOWN] to change.
Hold to adjust the frequency
• Press [SET] to confirm
NOTE:
1) In date and time setting mode, the clock will automatically return to time mode if no keys are
pressed for more than1 minute, and will reset to the time last used.
2) The settings order is: year, month, day, 12/24 hr format, hour, minute.

CLOCK ALARM

To set the alarm
For the dual-alarm function, use either a beep or the radio.
3