Publicité
(4)
(4) Put the suction hose with the handpiece, suc-
tion pipe and floor nozzle together.
6.2 Use
Unwind the power cord to the correct length and
insert the plug into the socket. Then press the
button to start the machine. The vacuum cleaner
will begin to operate. The suction level control is
located on the handle.
When you unwind the cable, make
sure it only goes as far as the yellow
marker. Never pull it out as far as the
red marker.
You can use the attachment for the floor as well
as for carpet.
Attention!6.3 Detaching the tank
If the tank has reached the Y. full mark wi dust
and dirt must be emptied. The air filter should
also be cleaned. Remove this dust tank as shown
in the following pictures. When reinserting alway
on the correct setting of the tank. Otherwise the
air escapes and the necessazy negative pressure
can no longer be constructed to vacuuming
www.DeubaXXL.de
15
Publicité
