Publicité
Part A-Positive LCD
A1: RCC icon
A3: Alarm1 icon
A5: Weekday
A7: Date
A9: Year
Part B – Buttons and Framework
B1: "SNOOZE" touch sensor
B3: "Alarm" button
B5: "DOWN" button
B7: "WAVE" button
B9: Support frame
Initial operation:
Open the clock battery compartment cover
Insert 2 x AA batteries observing correct polarity [ "+" and "-" marks]
When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds,
you will hear a beep tone and the clock begins the search for the radio signal.
Reception of the radio signal:
The clock automatically starts the DCF signal search after 7 minutes of any restart or changing
of new fresh batteries. The radio mast icon starts to flash.
At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with
the DCF signal to correct any deviations to the exact time. If this synchronization attempt is
unsuccessful (the radio mast icon disappears from the display), the system will automatically
A2: Time
A4: Alarm2 icon
A6: Temperature
A8: Humidity
A10: Month
B2: "SET" button
B4: "UP" button
B6: "°C/°F" button
B8: Hanging hole
B10: Battery compartment
EN2
Publicité
