Publicité
Mounting Guide
Wall or Other Mounting with VESA Standard
CAUTION The wall mount must bear a minimum of five times the monitor's net
weight. To mount your MONITOR to the wall or another surface, you need to
purchase a VESA wall mount. Use four M4-L8 mm screws (the base
attachment screws removed in step 1 below are M4-L8 mm) to attach the
mount. The monitor mount VESA hole pattern for
0E-22LED3 is 75mm x 75mm;
for 0E-24LED3/0E-27LED3 it is 100mm x 100mm.
Note: Metric (M4-L8 mm) is the type of screw that should be used (do not use
longer screws or the monitor may be damaged).
1. Before mounting the monitor, remove the bracket (vertical portion of the base)
by removing the two screws near the top with a screwdriver. Then the base and
the bracket can be removed. In order to prevent losing these screws, we suggest
replacing the screws in their original holes.
2. Attach the VESA mount plate (0E-22LED3, 75mm x 75mm), (0E-24LED3/
0E-27LED3, 100mm x 100mm) to the rear of the monitor and follow all of the
instructions provided with the mount to complete the mounting process.
11
Publicité
