Publicité
B
Product usage
Calibration!
It's recommended to calibrate the machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water consumption,
saving you money and time. For this reason it's recommended to calibrate the
appliance for best use.
1.
Remove all accessories from the drum and close the door;
2.
Insert the mains plug to the socket;
3.
Switch on the washing machine, and within 10 seconds, long press "No Spin"
button, and then the lamp of "child lock", "No Spin" and "Pause/start" all light.
4.
Press "Pause/start" to calibrate, the drum will rotate for a minute. If the
machine is successfully calibrated, "Prewash" lamp will light, otherwise,
"Extra Rinse" will light.
•
Before Washing
earth
terminal
1.
Plug in
2.
Open tap
3.
Load
4.
Close door
5.
Add detergent
Note:
•
Detergent need to be added in compartment I if the pre-wash function is
selected.
•
When closing the door, please make sure that your clothes are not caught
between the sealing ring and the machine door to prevent water leakage
caused by pulling and damaging the sealing ring during operation.
10
EN
Publicité
