Publicité
Maintaining and cleaning the appliance
Changing the dust bag
4
Maintaining and cleaning the appliance
–
Before changing the dust bag, switch off the appliance and disconnect the plug from the mains
socket.
–
Change the dust bag when the dust bag change indicator appears in the inspection glass, the
vacuuming performance declines notably, before long storage or before shipping.
–
The dust bag and its contents can be disposed of in normal household garbage unless it con-
tains dirt that is forbidden in the household garbage.
On the bag change, see also
Be sure to replace the dust bag with a dust bag of the same type:
Either from the
Severin spare parts line:
Severin dust bag set
(4 dust bags + 1 motor protection filter)
Item number SB7211
Cleaning or replacing the filter
–
Before changing or cleaning the filter, switch the appliance off and disconnect the plug from the
mains socket.
–
The motor filter can be washed, however it cannot be washed in the dishwasher or washing ma-
chine.
–
Rinse the motor filter out thoroughly under running water ( illustrated Quick Start Guide, detail
).
Let the motor filter dry for approx. 24 hours at room temperature after cleaning.
Only insert the motor filter when it is completely dry.
–
To clean the exhaust filter, first knock the dust out of it then brush with a soft brush.
( illustrated Quick Start Guide, detail
For the filter cleaning, see also
Cleaning
–
Before cleaning, switch off the appliance and disconnect the plug from the mains socket.
–
The housing and power cable may not be handled with liquids or immersed in liquids for reasons
of electrical safety. Rub housing with a slightly damp cloth and then dry.
–
For cleaning, do not use any sharp or scouring cleansers or hard brushes.
illustrated Quick Start Guide.
Or from the
Swirl accessories line:
Swirl X351 MicroPor Plus
®
®
®
Swirl
, X351
and MicroPor
are registered trademarks of a com-
pany of the Melitta Group which is not associated with SEVERIN.
).
illustrated Quick Start Guide.
X X 351
351
15
15
Publicité
