Sunshade Position - RADEMACHER ReWiSo Notice De Montage Et D'utilisation

i

6. Sunshade Position

After setting the travel direction, you can now teach-in a sunshade position.
An individual position can be set for awnings or Venetian blinds up to which the sunshade
is extended in Automatic mode. With adjustable Venetian blinds, the opening angle of
the slats can also be set (reversing).
Select the desired step with the key
(Continue) to skip the setting of the sunshade position. The sunshade is then
always fully extended (closed) in Automatic mode. In this case continue as
described in section „6 Saving the Basic Settings".
(Learn) to learn the sunshade position.
(Clear) to clear a sunshade position already learned. The sunshade is then
again always fully extended (closed) in Automatic mode. In this case continue
as described in section „6 Saving the Basic Settings".
Confirm your selection with the SET key.
:Select the desired step with the key:
GB
163