Publicité
Horizontal louvered panel VS
1M Dark gray : 15-738508 / 1M White : 15-738515 / 1,3M Dark gray :
These instructions have to be saved during the whole product life cycle.
We advise you to read these very carefully before proceeding to the assembly.
The user will be reliable for any damages or injuries caused due to incorrect or improper
installation.
1. BEFORE ASSEMBLY
Before installing your horizontal louvered panel, please take in account the following
information:
• Horizontal louvered panel cannot be fitted under the crank handle on pergolas from the
older Ombrea collections with a hook crank or with the crank under the beamand not in
the box. For pergola models with a crank located on the beamin a box and is not a hook
that attaches to a ring, it will be possible to install an accessory.
• It is possible to install a complete wall (3 panels) on the right or left side of the pergolas,
however bear in mind that there will be a gap of 11.6 cm between the last panel and your
façade.
• It is possible to install panels of 1M to fill one side of 3M of your pergola only on Ombréa®
pergolas purchased from the beginning of 2021 with a 279 cm between posts. For pergolas
with 282 cm between posts, you can only attach only 1 or 2 louvered panels on each side.
2. PRECAUTION OF USE
We only guarantee the louvered panel's resistance to winds of up to 100 km/h.
Do not attempt to climb on the louvers.
No modifications may be made to the product. Products tampered with by the user are no
longer covered by the manufacturer's warranty.
3. WARRANTY
Ombrea horizontal louvered pane carry a 2-year legal warranty from the date of purchase.
The warranty only applies if the instructions for storage, assembly, use and maintenance are
followed.
ENGLISH
15-738522 / 1,3M White : 15-738539
16
Publicité
