Publicité
•
Make sure that the towbar is suitable for the vehicle before starting the installation.
•
For safety, all work involving towbar installation (incl. electrical components) must be undertaken by skilled technicians.
•
Damaged components must be replaced with manufacturer's spares and fitted by qualified staff.
•
It is forbidden to make any modification or structural repair to towing assembly.
•
The towball must be kept clean and lubrificated. For added safety, his diameter (50 mm) must be checked at regular
intervals. If the towball measures less than 49 mm after selected readings across the diameter, the towball must be
replaced with a new one.
•
After 1000 km of towing, check torque settings for nuts and bolts, in accordance with the table.
•
Umbra Rimorchi cannot be held responsible for any defects in the product caused by fault or by any injudicious use
whatever of the user or a person he is liable for.
•
The tow bar installer must fix at the same level with the ball in a clear position, a plate with the ball's maximum load for the
vehicle on which the tow bar is fitted.
SAFETY INSTRUCTIONS
USE AND MAINTENANCE
CAUTION
13157 • 1.3 • 27/02/2024
8
Publicité
