EN
BOILING WATER
Press the lid release button (3) and fill the kettle with fresh water through the open lid (2).
Read the quantity on the water level indicator. Do not fill less than the minimum and maxi-
mum marks indicated.
Close the lid until it locks and place the kettle on the base.
Press the switch up. If the kettle has led light, it will turn on. The water is heated.
The kettle switches off automatically once the water is boiled.
The appliance can also be switched down at any time by pulling up the ON/OFF switch.
Warning: If you remove the kettle from the base and replace it before the heating process
is over, the kettle will continue to heat the water.
Only operate the kettle with the lid closed.
After boiling, let the kettle cool down for 5 minutes before refilling it with water.
Do not turn on the appliance if the kettle is empty, otherwise the overheat control will
engage and the appliance will switch itself off automatically.
BOIL DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool before filling
with cold water to re-boil.
MAINTENANCE AND CLEANING
1. Do not forget to remove the plug from the socket before cleaning the appliance.
2. Wipe outside with soft dry cloth when the kettle is wet, never use metal polish.
3. Never use a dishwasher to clean any parts from the machine.
4. Rinse the kettle with clear water
5. Put the water kettle in a dry and not very hot place.
DESCALING
Regular descaling makes your kettle last longer, ensures proper function and saves energy.
Descale the kettle with vinegar or a commercial descaling agent.
Fill the kettle with water up to the max mark and bring to a boil. Next add a small amount
of white vinegar and let it sit for a couple of hours. You can also use a commercial desca-
ling product and follow the manufacturer's instruction.
Rinse the kettle with clear water.
If you use the kettle daily, descale more frequently.
16