Publicité
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x sitting ball
cover (1)
air chamber (2)
valve closure (3)
1 x instructions for use
Technical data
Dimensions (inflated, without ears):
approx. 45cm (Ø)
Maximum load: 50kg
Date of manufacture (month/year):
10/2019
Intended use
The product is designed as an indoor toy for
children 3 years and over. The product is not
intended for commercial use.
Safety information
WARNING!
• Adult assembly required. Ensure that the
product and all components are not given to
children until after assembly.
• Risk of suffocation for children! Do not allow
children to play unsupervised with the product
or the packaging materials.
RISK OF INJURY!
• The product may only be used by persons
who are familiar with the safety information.
• Age-appropriate motor skills and sense of
balance are required for safe use.
4
GB/IE/NI
• The product is not suitable for bouncing.
• Observe the maximum load. Exceeding the
weight limit can damage the product or impair
its function.
• Check the product for damage or wear
before each use. Only use the product if it is
in perfect condition! Do not use the product if
it is visibly damaged or if you suspect that it is
damaged.
• Do not use the product if it can no longer
retain air.
• This product is not a swimming aid!
Preventing damage to the item!
• All inflatable products are sensitive to cold.
Never unfold and inflate the product at
temperatures below 15 °C!
• Make sure the product – especially in inflated
condition – does not come into contact with
sharp objects and isn't rubbed or ground
against anything, otherwise the material can
be damaged.
• Insert only insert an appropriate pump
adapter into the valve.
Otherwise the valves can be damaged.
• Do not over-inflate – this can result in the
seams splitting open. Close the valve securely
after pumping up.
• Avoid contact with sharp, hot, pointy or
hazardous items.
• Keep away from open fire!
Inflating
WARNING!
• Always inflate the air chamber
completely!
• Avoid overinflating the air chamber,
since there is a risk of overstretching
the material or tearing the seams.
• To inflate the product, use a
commercial foot pump or double-
stroke piston pump with the
appropriate pump adapter.
• Do not use a compressor or
compressed air canisters to inflate
the product. These can damage the
product.
• Make sure the chamber is evenly
inflated.
Publicité
