Publicité
Problem
• Improper power cord and
No power
Display shows
• The unit is not operating
E1 or E2
Cannot
• Both the upper basket and
activate Sync
Finish
• Not using knob
Cannot select
function
• Sync Finish is activated
Cannot pause
single cavity
• The upper basket and lower
Food
undercooked
• Food not placed in an even
Possible Reasons
outlet connection
properly
lower oven have not been
programmed
oven are operating at the
same time
layer
Solutions
• Check that the power cord is
firmly plugged into outlet. If this
cannot solve the problem, please
contact the Customer Service
Center at +1-866-646-4332.
• Contact the Customer Service
Center at +1-866-646-4332.
• To activate Sync Finish a
function must be selected for
both cavities. Then, the
button will appear. If Sync Finish
is activated the Sync Finish
indicator
OPERATION INSTRUCTIONS.
• After touching
knob can be rotated to change
the function and pushed to
select a function. The actual
functions cannot be touched for
selection. See OPERATION
INSTRUCTIONS.
• While Sync Finish is activated,
either
pause, and resume both cavities
to ensure that both cavities
finish at the same time. If you
wish to control each cavity
independently, do not use Sync
Finish.
• Overall, the Two-Zone Air Fryer
Oven is faster than cooking two
consecutive batches in the same
air fryer.
However, if the upper basket
and lower oven are operating
simultaneously, cook times will
need to be increased. See
COOKING.
• For best cooking performance,
place food in an even layer with
no overlapping. See COOKING.
31
will be lit up. See
or
the
button will start,
EN
Publicité
