Publicité
SPECIFIC WARNINGS
OVERLOAD PROTECTION SYSTEM
The appliance's motor is safeguarded against burning out by a manual reset cut-out
switch. If the appliance is overloaded or used continuously for an extended period, the
motor may overheat and shut down.
To resume operation, switch off the appliance, disconnect it from the power socket,
and allow it to rest for at least 30 minutes. Once the motor has fully cooled, the
appliance can be used again.
SAFETY SWITCH FOR THE MIXER HEAD
The motor will not activate if the Mixer Head is lifted. If raised during operation, the
safety switch will trigger, immediately shutting off the motor.
Furthermore, if the appliance is plugged in while the speed control is not set to 0, the
safety switch will prevent operation.
In either scenario, to restart the machine, return the head to the locked position and
set the Speed Control back to 0. The appliance should then operate normally.
SAVE THESE INSTRUCTIONS!
7
EN
Publicité
