Publicité
ENGLISH
Fireplace
Installation
1. Insert the metal tray into the base.
2. For Indoor Installations insert the Indoor
Safety Tray. The appliance must not be
operated indoors without the Safety Tray
installed.
For outdoor installation go to Step 3.
3. Insert Burner into metal tray.
4. Insert Glass Screen. (If applicable).
Align each glass screen tab with the
designated slots in the metal tray, gently put
into position. Exercise caution so as not to
fracture or damage glass.
If included as a standard part (compulsory
in the USA), the appliance must not be
operated without the glass screen installed.
R400 Round Glass Screen Installation
4a. Ensure all corner covers are on.
4b. Install the three (3) glass support metal
brackets.
4c. Insert burner into the model. Add glass
charcoal around the burner - be careful not
to scratch the burner surface.
4d. Carefully place the glass fire screen
onto the three (3) metal brackets. Ensure
bumpers are intact on the brackets to
prevent damaging the glass fire screen.
5. Add glass charcoal around the burner - be
careful not to scratch the burner surface.
Do not place glass charcoal on top of the
burner or where they can interfere with the
operation of the burner or the flame.
6. These models come with Ground Fixing
Brackets so they can be installed in a
fixed position. Follow the instructions
supplied with the Ground Fixing Brackets to
complete the installation of the product.
OPERATE ACCORDING TO THE BURNER
OPERATIONS MANUAL INCLUDED WITH
THE BURNER.
© Copyright 2004 - 2023 MAD Design Group. All rights reserved. V1123
Publicité
