Publicité
Search Codes
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the P
seconds.
3) Release the R
ETURN
4) Press the P
OWER
5) If there was a response, press R
response, repeat Step 4. If you repeat Step 4 a total of 52 times without a response, use
the remote control that came with your equipment.
6) Press R
+ to exit.
ETURN
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR" or
"DVD".
2) Press and hold down the VCR or DVD P
more than three seconds.
3) Release the R
ETURN
4) Press the VCR or DVD P
5) If there was a response, press R
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press R
+ to exit.
ETURN
Remote Programming
button, then press the R
OWER
+ button, then release the P
button on the remote, and see if the cable or satellite box responds.
ETURN
+ button, then release the VCR or DVD P
button, and see if the VCR or DVD responds.
OWER
ETURN
ETURN
button.
OWER
+. The codes are now set. If there was no
button, then press the R
OWER
+. The codes are now set. If there was no
+ button for more than three
+ button for
ETURN
button.
OWER
21
Publicité
